Blister vacuum  forming mould,Multi-station Thermoforming vacuum form machine  line
  • Blister vacuum  forming mould,Multi-station Thermoforming vacuum form machine  line
0

Blister vacuum forming mould,Multi-station Thermoforming vacuum form machine line

  • products detail
  • Product Parameters
  • Working environment: temperature 0℃~45℃,relative humidity is not more than 90%.
    Cylinder working pressure(bleed pressure) of core-pulling mechanism:0.5MPa~0.7MPa
    Vacuum pressure:-0.09Mpa-0.1Mpa
    Water cycle heating system: water temperature:90℃~100℃,pressure≥0.05MPa
    Mold working temperature:80℃~90℃
    The diameter of the vacuum hole is generally Φ0.5mm-Φ0.8mm
    Distribution of vacuum holes:The vacuum hole spacing is 30mm-50mm
    Surface roughness requirements for mold forming:Ra≤0.8mm
    Mold material:Cast aluminium alloy ZL401
    The mold wall thickness:≥15mm

    Working environment: temperature 0℃~45℃,relative humidity is not more than 90%.
    Cylinder working pressure(bleed pressure) of core-pulling mechanism:0.5MPa~0.7MPa
    Vacuum pressure:-0.09Mpa-0.1Mpa
    Water cycle heating system: water temperature:90℃~100℃,pressure≥0.05MPa
    Mold working temperature:80℃~90℃
    The diameter of the vacuum hole is generally Φ0.5mm-Φ0.8mm
    Distribution of vacuum holes:The vacuum hole spacing is 30mm-50mm
    Surface roughness requirements for mold forming:Ra≤0.8mm
    Mold material:Cast aluminium alloy ZL401
    The mold wall thickness:≥15mm

  • Working environment:
    relative humidity is not more than 90%
    Vacuum pressure:
    -0.09Mpa-0.1Mpa
    Water cycle heating system:
    water temperature:90℃~100℃,pressure≥0.05MPa
    Mold working temperature:
    80℃~90℃
    Distribution of vacuum holes:
    The vacuum hole spacing is 30mm-50mm
    Surface roughness requirements for mold forming:
    Ra≤0.8mm
    Mold material:
    Cast aluminium alloy ZL401
    The mold wall thickness:
    ≥15mm